In short
- Wahl UK lists its guards as #1 3mm, #2 6mm, #3 10mm, #4 13mm, #5 16mm, #6 19mm, #7 22mm and #8 25mm, about an eighth of an inch per step.
- Andis sells its guards by inch size, from 1/16 inch to 1 inch, which works out at about 1.6mm to 25.4mm.
- The half sizes fill the gaps at the short end: Wahl's 0.5 comb leaves 1.5mm and its 1.5 comb leaves 4.5mm.
- With no guard, a clipper blade leaves well under a millimetre, about 0.5mm on Wahl's figures, and a foil shaver about 0.1mm.
- The taper lever moves the length by less than a millimetre, 0.5mm to 1.2mm on Wahl's Magic Clip, so it is for blending between guard sizes.
The short answer
A clipper guard number is roughly how many eighths of an inch of hair it leaves. Wahl says a #1 guard "typically leaves 1/8 inch (3mm) of hair, while a #4 guard leaves 1/2 inch (13mm) of hair" (Wahl UK, cutting lengths). Each step up adds about 3mm, so a #2 is about 6mm and a #8 about 25mm, or one inch.
Quick version: #1 = 3mm, #2 = 6mm, #3 = 9 to 10mm, #4 = 13mm, #5 = 16mm, #6 = 19mm, #7 = 22mm, #8 = 25mm.
In UK barber shops you will also hear the numbers called grades, as in "a grade 2 back and sides". Wahl UK's own step-by-step guides use the word the same way, with a "grade 1" and a "1.5 grade" (Wahl UK, Mid fade pompadour).
The numbers are close between brands but not identical, especially at the short end and at the #3. If the exact length matters to you, say it in millimetres as well as the number.
The full chart
| Number | Wahl UK | Andis size | Andis in mm (our conversion) |
|---|---|---|---|
| Shortest guard | 1.5mm (sold as 0.5) | 1/16 inch | 1.6mm |
| Between the shortest and #1 | Not listed | 3/32 inch | 2.4mm |
| #1 | 3mm | 1/8 inch | 3.2mm |
| #1.5 | 4.5mm | 3/16 inch | 4.8mm |
| #2 | 6mm | 1/4 inch | 6.4mm |
| #3 | 9mm or 10mm | 3/8 inch | 9.5mm |
| #4 | 13mm | 1/2 inch | 12.7mm |
| #5 | 16mm | 5/8 inch | 15.9mm |
| #6 | 19mm | 3/4 inch | 19.1mm |
| #7 | 22mm | 7/8 inch | 22.2mm |
| #8 | 25mm | 1 inch | 25.4mm |
| #12 | 38mm | Not in the sets we checked |
Where the figures come from: Wahl UK's black attachment comb page for #1 to #8 and #12, its optimised comb set for the 9mm #3, and its 0.5 and 1.5 comb pages. For Andis, its 11-comb snap-on set, small magnetic set and large magnetic set.
The limits. Andis lists its combs in inches only, so the last column is our conversion at 25.4mm to the inch, rounded to one decimal place. Andis also does not print a number next to each size on the pages we read. We have lined its inch sizes up with the numbers using Wahl's own statement that a #1 is 1/8 inch and a #4 is 1/2 inch, which puts the numbers an eighth of an inch apart.
Where the makers differ
- The #3. Wahl UK lists the #3 as 10mm on its single black comb and 9mm in its optimised #1 to #8 set. Andis's 3/8 inch works out at 9.5mm. The difference is about half a millimetre, but it is the one whole size where two pages from the same maker disagree.
- The short end. Wahl's half comb is 1.5mm. Andis sells both a 1/16 inch comb (about 1.6mm) and a 3/32 inch comb (about 2.4mm). Which of those a barber calls "a half" or "a 0.5" depends on the brand in their drawer, so at this end of the chart say the millimetres.
- Inches against round millimetres. Because Andis works in exact inches, its sizes run a fraction longer than Wahl's rounded millimetres: 3.2mm against 3mm for a #1, 25.4mm against 25mm for a #8. Nobody would see that difference on a head.
- Guards do not swap between brands. Wahl says its attachment combs "only fit Wahl clippers and are not recommended for other makes of clipper" (Wahl UK). Each Andis set lists the Andis models it fits.
- BaBylissPRO and Oster. We could not read either maker's own spec pages: the pages no longer exist or refused automated reading. Rather than copy figures from shops, we have left them out. If you own one of these, check the size printed on the guard or the box.
Half sizes: 0.5 and 1.5
Half guards exist because the jumps between the short sizes are big in relative terms. Going from a #1 (3mm) to a #2 (6mm) doubles the length, so a fade cut with whole numbers only can show steps. Wahl UK sells a 0.5 comb at 1.5mm and a 1.5 comb at 4.5mm, and its 5 Star Cordless Magic Clip comes with 0.5 and 1.5 combs alongside the 1, 2, 3, 4, 6 and 8 (Wahl UK, Magic Clip). Andis's 11-comb set fills the same gaps with its 3/32 inch and 3/16 inch combs.
Wahl's own advice for its fading clipper is to stick to the lower guide combs, from the #0.5 to the #2, rather than use it for taking off bulk (Wahl UK, The secret to a perfect fade). That is where the half sizes earn their place.
On a plain back and sides they matter less. After a week of growth, about 2.5mm, a side cut with a 1.5 is about 7mm and one cut with a #2 is about 8.5mm, so the difference you chose on the day has shrunk in relative terms.
Zero, the bare blade and the foil
Take the guard off and you get the clipper's own blade length. Wahl says the blade alone is "often called a #0" and "cuts hair down to about 0.5mm"; the same page also says its standard blade cuts to 0.8mm (Wahl UK, cutting lengths). Both figures are on one page, and the real length depends on the clipper and where its lever sits.
Clippers made for fading go shorter. Andis numbers its blade positions rather than giving millimetres: the blade on its Master clipper adjusts from 000 to 1 (Andis, Master), and the one on its Fade Master from 00000 to 000, closer still (Andis, Fade Master). A 2018 Modern Salon piece on bald fading with Kenny Duncan, the United States lead educator for Andis, notes that "The closest-cutting clipper will leave the hair at .2 mm" (Modern Salon, 2018).
Below that is the foil shaver. Wahl lists its Finale foil shaver at a 0.1mm cutting length and says it is designed for jobs including "bald fades" (Wahl UK, Finale). A razor goes to the skin itself.
| Tool or setting | Leaves about | Source |
|---|---|---|
| Foil shaver | 0.1mm | Wahl UK, Finale |
| Closest fading clippers | 0.2mm | Modern Salon, 2018 |
| Bare clipper blade, "#0" | 0.5 to 0.8mm | Wahl UK |
| Magic Clip, lever closed to open | 0.5 to 1.2mm | Wahl UK |
| Half guard | 1.5mm | Wahl UK |
So when someone says "skin", they mean a foil or a razor. When they say "zero", they usually mean the bare clipper blade, which still leaves a shadow of hair.
The lever: open and closed
Many barber clippers have a taper lever on the side that slides the cutting blade forwards and back. Wahl's guide explains that "The taper lever allows you to change the closeness of your cut between guide comb lengths", with the lever up for a closer cut and down for a longer one. It also notes that not every clipper has one (Wahl UK).
Barbers call the two ends closed, the shortest, and open, slightly longer. In Wahl's afro mid skin fade guide, the bare blade with the lever closed is called "0", with the lever open "0.5", and half open "0.25" (Wahl UK, Afro mid skin fade). The same guide uses the lever with guards on too, such as a #2 guard "open".
The range is small. Wahl lists its 5 Star Cordless Magic Clip at 0.5mm to 1.2mm without combs (Wahl UK, Magic Clip), so the whole travel of the lever is under a millimetre. That is why barbers use it to blend between two guard sizes, not to replace one.
Watch out: because "0.5" can mean a 1.5mm half guard or the bare blade with the lever open, ask for the length in millimetres if you are not sure which your barber means.
How guard lengths grow out
The number on the guard is the length on the day of the cut. After that, every length on your head grows by about the same amount: scalp hair grows about 1cm a month according to DermNet, and a 2021 review quotes about 0.35mm a day (Rebora and Guarrera, 2021).
| Guard on the day | After 1 week | After 2 weeks | After 4 weeks |
|---|---|---|---|
| #1 (3mm) | About 5.5mm | About 8mm | About 13mm, a #4 |
| #2 (6mm) | About 8.5mm | About 11mm | About 16mm, a #5 |
| #4 (13mm) | About 15.5mm | About 18mm | About 23mm |
The table is our arithmetic at 0.35mm a day, rounded. The short guards change most: a #1 cut has more than doubled within two weeks. That has a practical side. If you judge the length you want by looking at your hair three weeks after your last cut, it will look like a bigger guard than the one that was used. Ask for the guard that was used on the day, or say "same as last time, it was a 2", not "about this length".
Common requests, in millimetres
Here is what the usual barber shop requests mean on Wahl UK's chart. Lengths on the top are usually given in centimetres because the top is more often cut with scissors.
| What people ask for | What it means |
|---|---|
| "Grade 1 all over" | About 3mm everywhere, a short buzz cut |
| "Number 4 all over" | About 13mm everywhere, a longer buzz cut |
| "A 2 back and sides, scissors on top" | About 6mm on the sides and back, the top left longer and cut by hand |
| "A 3 on the sides, tapered at the neck" | About 9 to 10mm on the sides, getting shorter towards the neckline |
| "Zero fade" | Bare blade at the bottom, about 0.5mm, blended up through guards |
| "Skin fade" | Foil or razor at the bottom, about 0.1mm or less, blended up |
| "A half on the sides" | About 1.5mm on Wahl's half comb, a little longer on some others |
If you are used to one shop's numbers and move to another, it is worth saying the millimetres for your next couple of visits. A difference of half a millimetre does not matter on a #6, but it shows on a fade.
Using guards at home
If you tidy your own hair between barber visits, the same chart applies. A few points from the makers, and from common practice:
- Start longer than you think. You can always go down a size; you cannot put length back. Common practice is to start one size above the one you want and check.
- Work from short to long for a fade. Wahl's advice for home fades is to use several guard sizes, such as #0, #1, #2 and #3, and to "Start with the shortest size at the bottom and work your way up" (Wahl UK).
- Check the guard is clipped on fully. A guard that is loose or knocked sideways can let the blade cut a patch much shorter than planned.
- Use the guards made for your clipper. Wahl says its combs are not recommended for other makes, and Andis lists which of its models each set fits.
- Clean the clipper after every use. That is Wahl's own advice on the same page.
- Leave the neckline line where it is. Tidy the stray hairs below it rather than cutting the line higher each time. Our guide to how often to get a haircut explains why the edges matter most between cuts.
How to ask for a length
- Give the number and the millimetres for anything short: "a 2 on the sides, so 6mm". It takes the brand question out of it.
- Say where each length goes. Sides and back, top, and how they meet: "a 2 back and sides, scissors on top, leave about 5cm".
- Use the lever if you know it, as in "a 1, lever closed", or simply "a bit shorter than a 2".
- Use the length on the day, not how it looks now. A #2 cut three weeks ago looks more like a #4.
- Use centimetres or fingers for the top, not guard numbers, unless the top is clippered too.
- If you want skin, say skin. "Zero" usually means the bare blade, and "0.5" can mean two different things.
For the rest of the words barbers use, see how to ask a barber for a haircut, and for which fade to ask for, fade types explained.
How we checked
We read the makers' own product and guide pages on 10 November 2026: Wahl UK's guide to cutting lengths and its single comb, comb set, half comb and Magic Clip pages, and Andis's comb set and clipper pages. Andis gives inches only, so the millimetres for Andis are our conversion at 25.4mm to the inch. Two Wahl UK pages disagree on the #3 (9mm and 10mm), and one Wahl UK page gives the bare blade as both 0.5mm and 0.8mm; we show both rather than pick one.
We could not read BaBylissPRO's or Oster's own spec pages, so their figures are left out rather than copied from retailers. The closest clipper length (about 0.2mm) comes from a 2018 Modern Salon piece on bald fading with an Andis educator. The growth table uses about 0.35mm a day (Rebora and Guarrera, 2021) and about 1cm a month (DermNet), and is our own arithmetic.
Where Donny Cutz fits
Donny Cutz is Taj's barber shop at 11 Copley Rd near Doncaster town centre. However you give your length, as a number, a grade or in millimetres, say it when you sit down. The service list covers the short end of this chart: a Haircut (£13), a Skin Fade Haircut (£16), a Zero 0.5 Fade, and a Back Neck Line Up between cuts. If you are not sure whether the Zero 0.5 Fade or the skin fade is the one you want, say what you are after when you sit down. The shop is open every day from 10am to 7pm, and you can book online with instant confirmation, then reschedule or cancel online.
When a barber is not the answer. If you only want a quick all-over clipper cut and own a set of clippers, the chart above is all you need at home. And if your hair is long and mostly cut with scissors, or coloured or chemically treated, a hairdresser who specialises in that kind of hair is a better fit, as those services are not on the list.
Questions people ask
What is a number 2 haircut in mm?
About 6mm, or a quarter of an inch. Wahl UK lists its #2 guard at 6mm, and Andis sells the same size as 1/4 inch, which is about 6.4mm.
Is a number 1 or a number 0 shorter?
A number 0 is shorter. It usually means no guard at all, just the clipper blade, which Wahl puts at about 0.5mm, while a #1 guard leaves about 3mm.
Are clipper guard sizes the same for every brand?
Close, but not identical. Wahl and Andis agree to within about half a millimetre from #1 to #8, but the #3 and the half sizes vary, and guards from one brand are not made to fit another brand's clippers.
What does lever open and closed mean?
It is the taper lever on the side of many clippers. Closed gives the shortest cut and open a slightly longer one; on Wahl's Magic Clip the range is 0.5mm to 1.2mm without a guard, so it is used for blending.
What size is a 1.5 guard?
Wahl UK lists its 1.5 comb at 4.5mm. The nearest Andis size is 3/16 inch, which is about 4.8mm.
Sources
- Understanding Clipper Cutting Lengths & Attachment Combs. Wahl UK, checked 10 November 2026.
- Black Plastic Attachment Comb. Wahl UK, checked 10 November 2026.
- Optimised Comb Attachment Set #1-8. Wahl UK, checked 10 November 2026.
- Clipper Attachment Comb, Black 0.5. Wahl UK, checked 10 November 2026.
- Clipper Attachment Comb Black, 1.5. Wahl UK, checked 10 November 2026.
- 5 Star Cordless Black Magic Clip. Wahl UK, checked 10 November 2026.
- HOW TO: Mid Fade Pompadour. Wahl UK, checked 10 November 2026.
- HOW TO: Afro Mid Skin Fade. Wahl UK, checked 10 November 2026.
- The Secret To A Perfect Fade. Wahl UK, checked 10 November 2026.
- Wahl Finale Finishing Tool. Wahl UK, checked 10 November 2026.
- Snap-On Blade Attachment Combs 11 Comb Set. Andis, checked 10 November 2026.
- Single Magnetic Comb Set Small (5pcs). Andis, checked 10 November 2026.
- Master Dual Magnet Large 4-Comb Set. Andis, checked 10 November 2026.
- Master Adjustable Blade Clipper. Andis, checked 10 November 2026.
- Fade Master Adjustable Blade Clipper. Andis, checked 10 November 2026.
- Bald Fading Tips from Kenny Duncan. Modern Salon, 2 April 2018.
- Hair loss. DermNet (Amanda Oakley, dermatologist), updated May 2023, checked 10 November 2026.
- Why Do Not All Chemotherapy Patients Lose Their Hair? Answering an Intriguing Question. Rebora A, Guarrera M, Skin Appendage Disorders (Karger), 2021.